KitRef

This insert holds:

M12 Right Angle Drill 2415
M12 Right Angle Impact Driver 2467
Large Format M12 Battery

Insert for storing Milwaukee Router inside Packout Compact Organizer

This insert was designed to hold the 1/2" Drive 47-piece SAE/Metric Ratchet and Socket Mechanics Tool Set #48-22-9010, but will work for any similar socket sets.
Has a removable top tray for the ratchet and shallow sockets with a positively cavernous storage space below.  The storage space is big enough to fit several open end wrenches up to 21mm.
This insert fits the 5-compartment packout organizer (48-22-8435), and is a 10-Spot Tools EXCLUSIVE.
We now offer latches to identify which tool is in which case.  Latches are offered at a discount if purchased with a matching insert.  Please ignore the mismatched name in the picture, if you order latches with this insert, they will say 1/2 CHROME on them.

This is our first DeWalt insert!  And yes, it's still for a packout case!
This insert will hold your DeWalt 20v max Atomic drill DCD708 and a battery of any size.
It includes SEVERAL individual organization spots for 2” power bits, 3” power bits, and larger bits like countersinks and Vix bits.
Also included are long and wide slots ideal for spade bits or even augers, a lift out tray for more of these types of bits, and a removable flip-up drill index to organize drill bits from 1/16-1/2” in diameter.  The drill index includes 2 spots for all of the smaller bit sizes, too!
All of the bit storage options are focused on easy removability, but as long as the lid is closed everything will stay in place.

This insert was designed to hold 4 1/2" grinder wheels.  It has 4 slots to keep everything organized.  Each slot can hold:

Up to 19 cutoff wheels
Up to 4 grinding wheels
Up to 3 flap wheels

This insert is designed to store and organize your 5" sanding discs.  Each slot can hold between 20 and 30 individual discs, and there are several slots to keep the discs organized.  The insert is available in 4 different configurations:

6 slots with legend,
6 slots without legend,
8 slots with legend,

This insert was designed to hold the IPS jaws for the M12 Propress.
It holds the 1/2”, 3/4”, and 1” IPS jaws, and it stores them in diagonal slots so that each can be accessed without moving the others.
This insert can fit in either the 5-compartment organizer (48-22-8435) or the 11-compartment organizer (48-22-8430) and is a 10-Spot Tools exclusive!
We now offer latches to identify which tool is in which case.  Latches are offered at a discount if purchased with a matching insert.  You can choose either (2) latches for the 5-compartment organizer or (1) latch for the 11-compartment organizer.

This insert will hold the m12 Pin Nailer in a full depth compact packout (48-22-8435).  It includes a parts tray to keep up to 6 different pin sizes organized, from 3/8" to 1 1/2".
There are 2 different versions of the insert available.  POPN-OG has only dividers for pins.  POPN-Fresh has a larger spot for a large format battery and still has plenty of room for pins.
Pics with accents and Fresh variant coming soon.
Latches with tool name available

 This insert is designed to hold:

M18 Compact Router 2723
Battery up to 8.0 -or- extra bit holder
Large Base Plate (will only fit the 5-compartment organizer)

This insert is designed to hold 29-piece 1/2" drive impact socket set 49-66-7016 and has a large open tray for extras.  
It fits in:

5-Compartment Packout Organizer 48-22-8435
11-Compartment Packout Organizer 48-22-8430

This insert is designed to hold:

19-piece deep well SAE socket set 49-66-7012
 3 piece impact extension set 49-66-6715

This insert is designed to hold 29-piece 1/2” drive metric deep well impact socket set 49-66-7015 with additional storage space. 
It fits in:

5-Compartment Packout Organizer 48-22-8435
11-Compartment Packout Organizer 48-22-8430

All of our leftover JLC stock is on sale for 20% off list price, but there are no options for color selection!  You get what you get!
This insert is designed to hold 29-piece 1/2" drive impact socket set 49-66-7016 and has a large open tray for extras.  
It fits in:

5-Compartment Packout Organizer 48-22-8435

This insert is designed to hold:

19-piece deep well SAE socket set 49-66-7012
 3 piece impact extension set 49-66-6715

This insert was designed to hold BOTH the m12 right angle die grinder (2485-20) and the m12 straight die grinder (2486-20).  It can store a large format battery on the angle grinder and a small format battery on the straight grinder.  It can also hold the m12 ratchet (2457-20) instead of the straight die grinder.
There is room for several 3" cutting wheels (about 18), and 4 slots for a variety of 2" sanding discs.  There are 24 spots for various burrs, bits, and mandrels, and extra room under each of the tools for additional storage.
If you're interested in this insert, but only have 1 of the 2 grinders, the space for the second grinder makes for a great deal of extra storage room.
This insert is a 10-Spot Tools exclusive, and was designed to fit either the 11-compartment organizer (48-22-8430) or the 5-compartment organizer (48-22-8435).

 This insert was designed to hold your M12 Fuel multi-tool and accessories.  There is also room for 2 batteries.
It fits in the 5-Compartment Organizer (48-22-8435).

This insert is designed to hold the M12 Force Logic Propress tool (2473-22) which includes the 1/2”, 3/4”, and 1” jaws, as well as the additional 1 1/4” press jaws (49-16-2453).  There is room for 2 small format m12 batteries.
The insert fits in the 5-compartment packout organizer (48-22-8435).
Latches with tool name available
 

All our leftover inventory from JLC is on sale for 20% off, but there is no option for color selection or latches.  You get what you get!
This insert was designed to hold any 1 of the following:

M12 Cross Line and Plumb Points Laser (3622)
M12 Cross Line and 4 Points Laser (3624)

All our leftover inventory from JLC is on sale for 20% off, but there is no option for color selection or latches.  You get what you get!
This insert was designed to hold the M18 Fuel 4 1/2" Paddle Switch Grinder (2780).  The insert can hold:

Grinder
Guard

All our leftover inventory from JLC is on sale for 20% off, but there is no option for color selection or latches.  You get what you get!
This insert is designed to hold the m18 mid-torque 3/8” impact wrench (2960-20) AND the 43-piece 3/8” impact socket set (49-66-7009), but it will hold a similar impact socket set from any brand.  It also holds an m18 battery up to 8.0 in size.
 
The insert fits in either the 5-compartment organizer (48-22-8435) or half of the 11-compartment organizer  (48-22-8430).
All our leftover inventory from JLC is on sale for 20% off, but there is no option for color selection or latches.  You get what you get!

All our leftover inventory from JLC is on sale for 20% off, but there is no option for color selection or latches.  You get what you get!
This insert is designed to hold:

M12 3" Random Orbit Sander 2535
(1) Large Format M12 Battery

All our leftover inventory from JLC is on sale for 20% off, but there is no option for color selection or latches.  You get what you get!
This insert was designed to hold your M12 Cable Stapler (2448-20), a full box of staples, and 2 small format M12 batteries.  
It fits in either the 5-compartment organizer (48-22-8435) or half of the 11-compartment organizer (48-22-8430).
This insert is a 10-Spot Tools exclusive!
All our leftover inventory from JLC is on sale for 20% off, but there is no option for color selection or latches.  You get what you get!

All our leftover inventory from JLC is on sale for 20% off, but there is no option for color selection or latches.  You get what you get!

All our leftover inventory from JLC is on sale for 20% off, but there is no option for color selection or latches.  You get what you get!
This insert is designed to hold:

All our leftover inventory from JLC is on sale for 20% off, but there is no option for color selection or latches.  You get what you get!
This insert holds:

Gen 2 M12 Stubby Impact Wrench 2562 (with or without protective boot)
(2) Large Format M12 Batteries

All our leftover inventory from JLC is on sale for 20% off, but there is no option for color selection or latches.  You get what you get!
This insert is designed to hold:

M12 Installation Driver 2505 with 4 Heads
(2) Large Format M12 Batteries

All our leftover inventory from JLC is on sale for 20% off, but there is no option for color selection or latches.  You get what you get!
This insert is designed to hold the Brother PT-E550BTVP P Touch Edge Handheld Industrial Label Printer.  It also fits model PT-E500.  In addition to the label maker itself, there are dedicated spots for:

2 extra batteries
Up to 6 label cartridges (depending on size)

All our leftover inventory from JLC is on sale for 20% off, but there is no option for color selection or latches.  You get what you get!
This insert is designed to hold the Brother PT-E560BTVP P Touch Edge Handheld Industrial Label Printer.  In addition to the label maker itself, there are dedicated spots for:

2 extra batteries (standard version) OR an AC adapter (AC version)
Up to 8 label cartridges (depending on size)

This insert was designed to hold m12 fuel jigsaw 2545.  There are dedicated spots for the dust collection adapters, zero clearance insert, and (2) large format m12 batteries.  Plus a spot for my favorite dewalt jigsaw blade case, and organizer slots under the tool.
This insert fits in either the 5-compartment organizer 48-22-8435 or the 11-compartment organizer 48-22-8430.  It can be bundled with a pair of latches for the 5-Compartment case or a single latch for the 11-compartment case.  

 This insert was designed to hold either the 1/2" or 3/8" M12 Band File (2482 or 2483).  It has 3 slots to organize different grits of sandpaper and also has a dedicated spot for the included hex key.  It can also hold 2 large format M12 batteries.
This insert was designed to fit in either the 5-compartment (48-22-8435) or 11-compartment organizer (48-22-8430), and is a 10-Spot Tools exclusive!
We now offer latches to identify which tool is in which case.  Latches are offered at a discount if purchased with a matching insert.  You can select (2) 5-compartment latches or (1) 11-compartment latch.
 

This insert was designed to hold your M12 Cable Stapler (2448-20), a full box of staples, and 2 small format M12 batteries.  
We are now offering a second version of this insert which is designed to accommodate a Nöhlster clip.  If you don’t know what this means, you can check them out here:  https://nohlster.com
It fits in either the 5-compartment organizer (48-22-8435) or half of the 11-compartment organizer (48-22-8430).
This insert is a 10-Spot Tools exclusive!
Latches with tool name available  You can select either (2) 5-compartment latches or (1) 11-compartment latch.  The standard clip version of the insert comes with 2 latches that say M12 CABLE STAPLER.  The Nöhlster version comes with one standard latch and one with the Nöhlster logo.

Holds:

M12 Charger
(3) small format M12 Batteries
(3) large format M12 Batteries

This insert was designed for the M12 cutoff tool.  It holds the tool with a large format battery on it, a second large format battery, a small format battery, the dust shield, and hex key.
There is also an organizer well with 2 slots for different kinds of cutting wheels, which can accommodate 12-20 wheels.
This insert can fit in the 5-compartment organizer (48-22-8435) or half of the 11-compartment organizer (48-22-8430), and is a 10-Spot Tools EXCLUSIVE!
We now offer latches to identify which tool is in which case.  Latches are offered at a discount if purchased with a matching insert.  You can select either (2) 5-compartment latches or (1) 11-compartment latch.

This insert was designed for the M12 detail sander.  
It can hold a large format M12 battery on the tool, as well as a second large format battery.  There is also room for a small format battery.
The insert includes an organizer with 4 slots for different grits of sandpaper and interface pads.
It is designed to fit in either the 5-compartment organizer (48-22-8435) or the 11-compartment organizer (48-22-8430), and is a 10-Spot Tools EXCLUSIVE!
We now offer latches to identify which tool is in which case.  Latches are offered at a discount if purchased with a matching insert.  You can select either (2) 5-compartment latches or (1) 11-compartment latch.

This insert was designed to hold BOTH the m12 right angle die grinder (2485-20) and the m12 straight die grinder (2486-20).  It can store a large format battery on the angle grinder and a small format battery on the straight grinder.  It can also hold the m12 ratchet (2457-20) instead of the straight die grinder.
There is room for several 3" cutting wheels (about 18), and 4 slots for a variety of 2" sanding discs.  There are 24 spots for various burrs, bits, and mandrels, and extra room under each of the tools for additional storage.
If you're interested in this insert, but only have 1 of the 2 grinders, the space for the second grinder makes for a great deal of extra storage room.
This insert is available in a 2-color design.  For single-color inserts, simply select the same color for both halves.
This insert is a 10-Spot Tools exclusive, and was designed to fit either the 11-compartment organizer (48-22-8430) or the 5-compartment organizer (48-22-8435).

This insert is designed to hold the M12 Force Logic Propress tool (2473-22) which includes the 1/2”, 3/4”, and 1” jaws, as well as the additional 1 1/4” press jaws (49-16-2453).  There is room for 2 small format m12 batteries.
The insert fits in the 5-compartment packout organizer (48-22-8435).
Latches with tool name available
We also offer a separate insert for the IPS Jaws which are compatible with this tool.  Both inserts can be purchased at a discount  which will appear if both items are added to the cart.  The IPS Jaw Insert can be found here:  
https://10spottools.com/products/ips-jaws-for-m12-propress-packout-insert?_pos=3&_psq=IPS&_ss=e&_v=1.0

This insert was designed for the M12 Fuel Hackzall model 2520.
In addition to the tool, it can hold 2 large format M12 batteries, and it has separate spots to organize 6” and 9” blades, with slots for both wood and metal blades in each length.
It fits in either the 5-compartment organizer (48-22-8435) or the 11-compartment organizer (48-22-8430), and is a 10-Spot Tools EXCLUSIVE!
We now offer latches to identify which tool is in which case.  Latches are offered at a discount if purchased with a matching insert.  Please ignore the mismatched latch photo.  If you order latches with this insert, they will say M12 HACKZALL on them.  You can order (2) 5-compartment latches or (1) 11-compartment latch.

This insert was designed to hold your M12 jigsaw, 2 large format batteries, and an assortment of blades.  There are 7 spots for keeping different types of blades organized.  It can accommodate about 35 blades in total.
This insert fits in either the 5-compartment organizer (48-22-8435) or the 11-compartment organizer (48-22-8430) and is a 10-Spot Tools exclusive!
We now offer latches to identify which tool is in which case.  Latches are offered at a discount if purchased with a matching insert.  You can select (2) 5-Compartment latches or (1) 11-Compartment latch.

This insert was designed to hold up to 8 large format m12 batteries.
It fits in either the 5-compartment organizer (48-22-8435) or the 11-compartment organizer (48-22-8430) and is available exclusively from 10-Spot Tools.
We now offer latches to identify which tool is in which case.  Latches are offered at a discount if purchased with a matching insert.  You can select (2) 5-Compartment latches or (1) 11-Compartment latch.

This insert was designed for your M12 inspection camera w/ 10 foot cable (2324) or 4-foot cable (2323).  
The insert also has a spot for all the attachments that can go on the end of the cable, and the SD card adapter that comes with the tool, as well as 2 small format M12 batteries.
It is designed with a raceway for the cable to tuck into which makes storing the tool neatly very easy.
This insert fits in either the 5-compartment organizer (48-22-8435) or half the 11-compartment organizer (48-22-8430), and is a 10-Spot Tools exclusive!
We now offer latches to identify which tool is in which case.  Latches are offered at a discount if purchased with a matching insert.  You can select (2) 5-Compartment latches or (1) 11-Compartment latch.

This insert was designed to hold up to 4 large format and up to 7 small format M12 batteries.
It fits in either the 5-compartment organizer (48-22-8435) or the 11-compartment organizer (48-22-8430) and is available exclusively from 10-Spot Tools!
We now offer latches to identify which tool is in which case.  Latches are offered at a discount if purchased with a matching insert.  You can select (2) 5-Compartment latches or (1) 11-Compartment latch.

This insert was designed to hold your M12 Fuel multi-tool and accessories.  There is also room for 2 batteries.
It fits in the 5-Compartment Organizer (48-22-8435).
Latches with tool name available  The latch that comes with this insert says M12 MULTI TOOL.

This insert was designed to hold your m12 rotary hammer (2412-20) OR your m12 Fuel rotary hammer (2612-20).
In both versions, there are slots underneath the tool to organize the various bits commonly used with it in 6" lengths.  There are 5 slots to accommodate 1/8", 3/16", 1/4", 5/16", and 3/8" SDS bits.  
There is also a larger slot to accommodate a couple SDS bits up to 12", as well as the depth rod.
There are separate spots for the side handle and the collar for the handle in the non-fuel version.
These inserts can hold the tool as well as 2 large format m12 batteries.

This insert was designed to hold the M12 Sander/Polisher (2438).  It has room for:

Sander/Polisher
Small M12 battery
Large M12 battery

For an insert for the new Gen 2 Stubby Impact Wrench, please click here.
If you already own this insert and would like to upgrade it to accommodate the new Gen 2 Stubby Impact Wrench, please click here.
This insert was designed to hold your m12 Stubby 3/8" Impact wrench (2554-20) as well as the Milwaukee 43-piece 3/8" impact socket set (49-66-7009) and 2 large format m12 batteries.

This fits in either the 5-compartment organizer (48-22-8435) or the 11-compartment organizer (48-22-8430), and is a 10-Spot Tools exclusive!

This insert was designed to hold your M12 Tubing Cutter 2471-20.
In addition, it also holds the Milwaukee close quarters tubing cutter set (48-22-4263) which includes 1/2", 3/4", and 1" cutters, and it has room for either a large format M12 battery OR a small format battery and a manual tubing cutter.
There is plenty of room under the tool to hold a manual tubing cutter, some two-turn brushes, sandpaper, or whatever else you want to keep with your tubing cutter.  
There are 3 additional wells for storing small items, and there is room under each mini cutter as well.  Under the 1" cutter there is enough room for a roll of solder.
This insert fits in the 5-compartment organizer 48-22-8435.

This insert was designed to hold your M18 Mid-Torque Impact Wrench (2861-20), an M18 battery up to 8.0, and the Milwaukee 11-Piece Lug Nut socket set (49-66-7833), though it will fit any similar or smaller lug nut socket set.
This insert will fit in either the 5-compartment organizer (48-22-8435) or half the 11-compartment organizer (48-22-8430), and is a 10-Spot Tools exclusive!
Latches with tool name available

This insert was designed to hold your M18 Mid-Torque Impact Wrench (2962), an M18 battery up to 8.0, and the Milwaukee 11-Piece Lug Nut socket set (49-66-7833), though it will fit any similar or smaller lug nut socket set.  This is a modified version of the original HWASH insert for the 2861.
This insert will fit in either the 5-compartment organizer (48-22-8435) or half the 11-compartment organizer (48-22-8430), and is a 10-Spot Tools exclusive!
Latches with tool name available

This insert was designed to hold your M18 Barrel Grip Jigsaw 2737B-20.  
It also has a dedicated spot for blades too long to fit in a typical blade case, a battery up to 5.0, a Collins coping foot, and the dust collection attachment included with the saw.
In addition, there is room for a DeWalt jigsaw blade case.  Though this is perhaps sacrilegious, they're the best jigsaw blade cases I've ever seen.
This insert fits in the 5-compartment organizer 48-22-8435 OR the 11-compartment organizer 48-22-8430, and is a 10-Spot Tools exclusive.
We now offer latches to identify which tool is in which case.  Latches are offered at a discount if purchased with a matching insert.  You can select (2) 5-Compartment latches or (1) 11-Compartment latch.

There are 2 inserts designed to hold the entire 6-Ton M18 Knockout Punch kit (2677-23) and everything it comes with. 
The first insert holds the knockout tool, 7/16" draw stud, quick connect alignment system, 1/2", 3/4", 1", 1 1/4", 1 1/2", and 2" punches and dies, and 2.0 battery.
The second insert holds the 2 1/2", 3", 3 1/2", and 4" dies, and the 3/4" draw stud.
Either insert can be stored in a 5-compartment organizer (48-22-8435), or if you’re feeling strong you can put both in an 11-compartment organizer (48-22-8430).
The tool insert costs $50, the large die insert costs $40, or you can buy both for $80. 

This insert was designed to hold the M18 Fuel 4 1/2" Paddle Switch Grinder (2780).  The insert can hold:

Grinder
Guard
Side Handle

This insert was designed to hold the Milwaukee 2904 M18 Hammer Drill/Driver.
It can also hold a battery up to 6.0, and has several spots for bit organizing, including:
-12 spots for individual 2” power bits
-6 spots for individual 3” power bits
-5 spots for larger 3” bits (like Vix bits or countersinks)

This insert is designed to hold the m18 mid-torque 3/8” impact wrench (2960-20) AND the 43-piece 3/8” impact socket set (49-66-7009), but it will hold a similar impact socket set from any brand.  It also holds an m18 battery up to 8.0 in size.
The insert fits in either the 5-compartment organizer (48-22-8435) or half of the 11-compartment organizer  (48-22-8430).
We now offer latches to identify which tool is in which case.  Latches are offered at a discount if purchased with a matching insert.  You can select (2) 5-Compartment latches or (1) 11-Compartment latch.

These 2 inserts (more to come) are designed to hold the 10-Piece Big Hawg bit set (49-56-9290) and the 8-Piece Selfeed bit set (49-22-030).  Each insert takes up half the 5-compartment organizer (48-22-8435).
The MB-BH fits in the lower half.  It has spots for all the hole saws with pegs in the middle to keep them centered so the teeth of one don’t bang against the walls of another.  It also has dedicated spots for the mandrel, extra center bits, sharpening stone, and hex key.
The MB-SF fits in the upper half.  It has 2 trays.  The lower tray hold the extension, 2 smallest bits, and extra screw centers and hex keys.  The upper tray holds all the larger bits and has a finger hole for easy lifting.
the BH costs $35 and the SF costs $45, or you can get both for $75.  These inserts are 10-Spot Tools exclusives!
Latches with tool name available  If you order both inserts with latches, you will get one of each instead of a pair.  Please ignore the mismatched latch photo.  The latches for these inserts have a Milwaukee M, followed by either BIG HAWG or SELF FEED.

This insert was designed to hold any 1 of the following:

M12 Cross Line and Plumb Points Laser (3622)
M12 Cross Line and 4 Points Laser (3624)
Lithium USB Cross Line and Plumb Points Laser (3522)

An insert to hold your Milwaukee MCM stripper with 11 aluminum cable stripping dies .  It can hold either the M12 (2435-20) or M18 (2935-20) version.
It can also hold either an M18 battery up to 2.0 or a small format M12 battery.
The M18 stripper exerts some pressure on the lid, but this does not prevent the lid from closing or other packouts from locking into it.  This can be relieved by removing the belt clip.
An insert to hold the 11 aluminum stripping dies, but it can hold 11 of the copper stripping dies instead, or a combination of both.
It fits in the 5-compartment organizer 48-22-8435, and is a 10-Spot Tools Exclusive!

This is a tray that sits in the top of the Packout Ammo Can, designed to hold smaller Packout inserts.  It can hold:

Jonah Pope Designs for the 48-22-8435 Packout Organizer
10-Spot Original designs for the 48-22-8435 (not all will fit snugly)
Several batteries or anything else!

This insert holds:

M12 FUEL 3/8" Right Angle Impact Wrench 2564
Small Format M12 Battery
Large Format M12 Battery

This insert can hold ANY ONE of the following:

M12 3/8" FUEL Ratchet 2557
M12 3/8" FUEL High Speed Ratchet 2567
M12 3/8" Ratchet 2457

This insert is designed to hold the Brother PT-E550BTVP P Touch Edge Handheld Industrial Label Printer.  In addition to the label maker itself, there are dedicated spots for:

2 extra batteries
Up to 6 label cartridges (depending on size)
USB cable (under the label maker)

This insert is designed to hold the Brother PT-E560BTVP P Touch Edge Handheld Industrial Label Printer.  In addition to the label maker itself, there are dedicated spots for:

2 extra batteries (standard version) OR an AC adapter (AC version)
Up to 8 label cartridges (depending on size)
USB cable (under the label maker)

This insert is designed to hold:

DeWalt DCS369 Compact Reciprocating Saw
20v Battery up to 4.0 in size
Room under the tool for shorter blades

This insert can hold the Fluke Micro Scanner 2 Kit (catalog # 2772451):

MicroScanner2 Cable Verifier with Main Wiremap Adapter
IntelliTone Pro 200 Probe
Set of Remote Identifiers # 2-7

This insert can hold the Klein ET450 Circuit Tracer Kit with extras:

ET450T Circuit Tracer
ET450R Receiver
3' Leads

This insert holds:

M12 FUEL 1/2” Stubby Impact Wrench 2555
2 Large format M12 batteries
Milwaukee 11-piece Lug Nut Socket Set 49-66-7833 (or any similar set)

This insert is designed to hold:

M12 3" Random Orbit Sander 2535
(1) Large Format M12 Battery
Dust Collection Adapter

This insert is designed to hold:

M12 FUEL Rotary Hammer (Gen 2) 2508
(2) Large Format M12 Batteries
Up to (6) 6" Long SDS bits up to 3/8" diameter in included SDS drill index

This insert is designed to hold:

M12 Installation Driver 2505 with 4 Heads
(2) Large Format M12 Batteries
(47) Individual 2-3" Power Bits

Holds:

M12 Palm Nailer 2458
(1) Large Format M12 Battery (on tool)
(1) Small Format M12 Battery

This insert is designed to hold:

M12 Rivet Tool 2550
6" Extension 48-95-0100
1 Small Format M12 Battery

This insert holds:

Gen 2 M12 Stubby Impact Wrench 2562 (with or without protective boot)
(2) Large Format M12 Batteries
Milwaukee 43-Piece Impact Socket Set 49-66-7009

All our leftover inventory from JLC is on sale for 20% off, but there is no option for color selection or latches.  You get what you get!
 
For an insert for the new Gen 2 Stubby Impact Wrench, please click here.
If you already own this insert and would like to upgrade it to accommodate the new Gen 2 Stubby Impact Wrench, please click here.
This insert was designed to hold your m12 Stubby 3/8" Impact wrench (2554-20) as well as the Milwaukee 43-piece 3/8" impact socket set (49-66-7009) and 2 large format m12 batteries.

An insert to hold:

M18 Angle Grinder 2880
Metal guard
Plastic over guard 

This insert is designed to hold:

M18 Drywall Screwgun 2866 (no belt clip)
M18 Cut Out Tool 2627 (with belt clip)
M18 Battery up to 2.0

An insert to hold:

M18 High-Torque Impact Wrench 2967
M18 battery up to 8.0
About 6-8 1/2” impact sockets

An insert to hold:

M18 High-Torque Impact Wrench 2967 with protective Boot
M18 battery up to 8.0
About 6-8 1/2” impact sockets

This insert is designed to hold:

M4 Screwdriver 2102
(2) M4 Batteries
M4 Charger

This insert is designed to hold:

8-piece Milwaukee Hook & Pick Set set (48-22-9218)

There are 2 different versions

This insert is designed to hold:

(4) Rhino USA Retractable Ratchet Straps - 1" x 10'
(4) soft loop tie-downs

THIS INSERT IS DESIGNED SPECIFICALLY TO SHARE A BOX WITH THE V2 JAWS INSERT.  FOR AN INSERT FOR THE C1 JAWS IN A LOW PROFILE ORGANIZER, PLEASE CLICK HERE.
 
This insert holds the entire Ridgid C1 Jaws kit (28043):

1/2" Compact Pro Press Ring

This insert is designed to hold the Ridgid Mini Pro Press KIT MODEL 72553.  It includes dedicated spots for:

Model 115 Mini Pro Press
3/4" Propress jaws
1/2" Propress jaws

This insert holds the entire Ridgid V2 Press Ring Kit (27428):

1 1/2" Pro Press Ring
2" Pro Press Ring

This insert is designed to hold the Spyder 14-Piece Hole Saw Set 600880.  It includes dedicated spots for:

4 1/2" and 4 1/4" Hole saws
4" and 3 1/2" hole saws
3" hole saw

This set is made up of 2 inserts available separately or as a combo for a discount.  Each one holds: 
RPPT ($50)

Ridgid Pro Press RP241
(2) 12v Ridgid batteries

These latches are designed to fit the packout organizer boxes that our inserts fit in.  This listing is for the half-width organizer box 48-22-8435.
Latches print in black with white text.  All small organizer latches have either an M18, M12, Milwaukee M, DeWalt, or Dremel logo.  Some have graphics instead.
 
Please email me at 10spottools@gmail.com for custom latch orders.

This insert is designed to hold:

2.5" Pro Press Ring
3" Pro Press Ring
4" Pro Press Ring

This is a modular system of inserts.  Each one takes up half of a 5-Compartment Organizer, so you can put 2 in 1 case.
RTO-M ($25) Holds:

Reekon M1 Caliber Miter Saw Measuring Tool

This insert is designed to hold:

M18 FUEL 3/8" Stubby Impact Wrench 2854 OR 1/2" Stubby Impact Wrench 2855
M18 Battery up to 8.0
Milwaukee 43-Piece 3/8" Impact Socket Set 49-66-7009

This insert system was designed to hold up to 2 M12 ratchets in a 5-compartment Packout organizer (48-22-8435).  There are both small and large modules to fit the various ratchets, and 2 modules fit in a case (or 4 modules in an 11-compartment organizer).  These modules can be combined with Ratcheteer socket modules to hold half a socket set and 1 ratchet instead of holding just 2 ratchets.
The large module (MRL) can hold one of the following:

M12 Fuel 1/2" Ratchet 2558
M12 Fuel 3/8 Ratchet 2557 w/ small battery

One of these new Ratcheteer modules can be combined with one of the older Ratcheteer modules in a single 5-compartment organizer case to hold either the SAE or Metric half of a chrome socket set with any M12 ratchet.
The insert holds:

All the SAE OR metric sockets from the 56-piece 3/8 drive Milwaukee socket set 48-22-9008 
Will work with same size sockets from other brands